Products catalog
Articles
Electric motor AIM 80
Description
General industrial asynchronous high-speed and low-speed (depending on modification) AIM 80 electric motors are produced by default for 380V (three terminals in the terminal box) and 220 / 380V 220 / 380V (six terminals in the terminal box), with copper winding. The engine rotates at 3000 rpm. When operating on 220 V, the power is reduced by 30%.
Technical characteristics of the AIM 80 electric motor
| Specifications | ||||||||||
| Type | Power kW | Frequency rotation rpm |
efficiency% | cos φ | Current at 380V A (New) |
Istart / In | Mstart / Mn | Mmax / Mn | Moment of inertia, kg * m2 | Weight kg |
| AIM 80A2 | 1,5 | 2850 | 78.5 | 0.84 | 3.46 | 7 | 2.2 | 2,3 | 0.0011 | 13 |
| AIM 80A6 | 0.75 | 905 | 69 | 0.72 | 2,3 | 5.3 | 2 | 2.1 | 0.0035 | 14 |
| AIM 80B2 | 2.2 | 2855 | 81 | 0.85 | 4.85 | 7 | 2.2 | 2,3 | 0.0018 | 15 |
| AIM 80A8 | 0.37 | 675 | 62 | 0.61 | 1.49 | 4 | 1.8 | 1.9 | 0.003 | 15 |
| AIM 80B4 | 1,5 | 1400 | 78.5 | 0.78 | 3.72 | 6 | 2,3 | 2,3 | 0.0034 | 16 |
| AIM 80B6 | 1.1 | 905 | 72 | 0.73 | 3.2 | 5.5 | 2 | 2.1 | 0.0048 | 16 |
| AIM 80B8 | 0.55 | 680 | 63 | 0.61 | 2.17 | 4 | 1.8 | 2 | 0.0038 | 18 |
| AIM 80A4 | 1.1 | 1390 | 76.2 | 0.77 | 2.85 | 6 | 2,3 | 2,3 | 0.0028 | 143 |
Overall and mounting-connecting dimensions of AIM 80 electric motors
| Overall and mounting-connecting dimensions for versions 1081 and 2081 | ||||||||||||||||||
| Type | Poles | L30 mm | h31 mm | d24 mm | L1 mm | L10 mm | L20 mm | L31 mm | d1 mm | G mm | b16 mm | d20 mm | d22 mm | d25 mm | b1 mm | b10 mm | b11 mm | h mm |
| AIM 80A | 2,4,6,8 | 310 | 214 | 200 | 50 | 100 | 3.5 | 50 | 22 | 18.5 | 10 | 165 | 4×12 | 130 | 6 | 125 | 165 | 80 |
| AIM 80V | 2,4,6,8 | 310 | 214 | 200 | 50 | 100 | 3.5 | 50 | 22 | 18.5 | 10 | 165 | 4×12 | 130 | 6 | 125 | 165 | 80 |
Parameters of AIM 80 A2, B2, B4 electric motors
Parameter 80 in the name of the high-speed electric motor series means the height of the shaft from the bed to the center of the motor axis.
Electric motor AIM 80 a2 is designed for continuous operation.
High-speed electric motors AIM 80 are produced in climatic version U, 2 categories of placement, which means that the engine should be used under a canopy, in the absence of direct sunlight and precipitation, or 3 categories – work in a closed room.
The AIM 80 v2 electric motor is supplied in a casing made of gray iron; if necessary, it can be made of silumin. The protection level corresponds to P54, which corresponds to the protection against dust and splash water. It is important that for the correct operation of the electric motor, the dust content in the AIM should not exceed 100 mg / m3.
Also high-speed electric motors AIM 80 v4 can be manufactured with increased sliding parameter, with two shaft ends, as well as in other special designs on request.
Rules of operation of AIM 80 electric motors
Depending on the operating conditions, the AIM 80 electric motors are offered in various mounting versions: on feet, with a flange, combined version.
It is important to note that the AIM 80 electric motor is equipped with an impeller, which contributes to better cooling. In addition, the ribbed shape of the case is used to normalize the temperature regime.
The AIM 80 electric motor is designed to operate in a temperature range from -42 to +42 degrees.
The engine efficiency reaches 78%, a level sufficient for the productive work of heavy equipment.
Dimensions of AIM electric motors
Order form
Specify your data and our managers will contact you shortly!
Delivery all over Ukraine
- Delivery of our products is carried out by delivery services in accordance with the deadlines.
- Electric motors in stock. Sending in the shortest time.
The quality system at the enterprise is certified in accordance with ISO 9001:2015
Call back order
Specify your phone number and our managers will contact you shortly!