Products catalog
Articles
Electric motor AIM 200
Description
Asynchronous electric motors AIM 200 belong to the class of general industrial three-phase motors, designed for continuous operation in an alternating current network.
Technical characteristics of AIM 200 engines
| Type | Power, kW | Speed of rotation, rpm | Efficiency,% | cos φ | Rated current at 380V, A |
Istart/In | Mstart/Mn | Mmax/Mn | Moment of inertia, kg*m2 | Mass, kg |
| AIM 200M6 | 22 | 980 | 90 | 0.83 | 44.7 | 7 | 2 | 2,1 | 0,2 | 195 |
| AIM 200M8 | 18.5 | 730 | 90 | 0.76 | 41.1 | 6.6 | 1.9 | 2 | 0.3 | 210 |
| AIM 200L6 | 30 | 980 | 91.5 | 0.84 | 59,3 | 7 | 2 | 2.1 | 0.25 | 225 |
| AIM 200L8 | 22 | 730 | 90.5 | 0.78 | 48.9 | 6.6 | 1.9 | 2 | 0.35 | 225 |
| AIM 200M2 | 34 | 2950 | 92 | 0.88 | 67.9 | 7.5 | 2 | 2.3 | 0,14 | 230 |
| AIM 200M4 | 37 | 1475 | 92 | 0.87 | 70.2 | 7.2 | 2.2 | 2.3 | 0.15 | 230 |
| AIM 200L2 | 45 | 2960 | 92.5 | 0.9 | 82.1 | 7.5 | 2 | 2.3 | 0, 16 | 255 |
| AIM 200L4 | 45 | 1475 | 92, 5 | 0.87 | 84.9 | 7.2 | 2.2 | 2, 3 | 0.18 | 260 |
Electric motor AIM 200: detailed description of electric motors AIM 200 m4, l4
The AIM 200 electric motor, by default, is manufactured for operation in a network with alternating current 220, 380 V, with six terminals in the terminal box.
Also AIM 200 l4 electric motor can have climatic modification, the third category of placement, which allows using the engine indoors, without adjusting climatic conditions.
It is important to note that AIM 200 electric motors are marked according to the degree of protection IP54. This means that the AIM 200 electric motor is protected from dust and splashes of water, however, its casing is not sealed, so it will not withstand prolonged immersion in water.
It is also possible to order motors, with two shaft ends, with increased slip characteristics.
Main characteristics and parameters of the AIM 200 M4 electric motor
AIM 200 electric motors can have different mounting designs – on feet with one cylindrical shaft end; on feet with two shaft ends. The motors can be installed in any spatial position. Also, AIM 200 electric motors are available in versions with a flange and combined – feet and flange. Electric motors can be produced with one or two cylindrical shaft ends.
It should be noted that the AIM 200 m4 electric motor corresponds to the insulation heat resistance class F, which means that the insulation is resistant to strong heating. This is achieved through the use of asbestos and fiberglass combined with synthetic materials.
The main parts of the engines, namely the shields and the frame, are made of cast iron.
High-quality materials and design features ensure the engine has a long-term operation without interruption.
Dimensions of AIM electric motors
Order form
Specify your data and our managers will contact you shortly!
Delivery all over Ukraine
- Delivery of our products is carried out by delivery services in accordance with the deadlines.
- Electric motors in stock. Sending in the shortest time.
The quality system at the enterprise is certified in accordance with ISO 9001:2015
Call back order
Specify your phone number and our managers will contact you shortly!