Products catalog
Articles
Electric motor AIM 355
Asynchronous electric motors AIM 355 belong to the class of general industrial three-phase motors, designed for continuous operation in an alternating current network.
Type | Power, kW | Rotation speed, rpm | Efficiency,% | cos φ | Rated current at 380V, A |
Istart /In | Mstart /Mn | Mmax /Mn | Moment of inertia, kg * m2 | Mass, kg |
AIM 355MA6 | 160 | 990 | 94.5 | 0.88 | 292 | 6.7 | 1.9 | 2 | 9.5 | 1550 |
AIM 355MB6 | 200 | 990 | 94.5 | 0.88 | 365 | 6.7 | 1.9 | 2 | 10.4 | 1600 |
AIM 355 M4 | 250 | 1490 | 95.2 | 0.9 | 443 | 6.9 | 2.1 | 2.2 | 6.5 | 1700 |
AIM 355L6 | 250 | 990 | 94.5 | 0, 88 | 457 | 6.7 | 1.9 | 2 | 12.4 | 1700 |
AIM 355M2 | 250 | 2980 | 95.2 | 0.92 | 433 | 7.1 | 1.6 | 2.2 | 3 | 1900 |
AIM 355L4 | 315 | 1490 | 95.2 | 0.9 | 559 | 6.9 | 2.1 | 2.2 | 8.2 | 1900 |
AIM 355MA8 | 132 | 740 | 93.7 | 0.82 | 261 | 6.4 | 1.8 | 2 | 7,9 | 2000 |
AIM 355MB8 | 160 | 740 | 94,2 | 0.82 | 315 | 6.4 | 1.8 | 2 | 10.3 | 2150 |
AIM 355L8 | 200 | 740 | 94.5 | 0.83 | 387 | 6.4 | 1.8 | 2 | 12.3 | 2250 |
AIM 355L2 | 315 | 2980 | 95.4 | 0.92 | 545 | 7.1 | 1,6 | 2,2 | 3,5 | 2300 |
The AIM 355 s4 electric motor, by default, is manufactured for operation in a network with alternating current 220, 380 V, with six terminals in the terminal box.
Also, the AIM 355 electric motor can have a climatic modification, the third category of placement, which allows the engine to be used indoors, without adjusting climatic conditions.
It is important to note that AIM 355 electric motors are marked according to the degree of protection IP54. This means that the AIM 355 electric motor is protected from dust and splashes of water, however, its casing is not sealed, so it will not withstand prolonged immersion in water.
It is also possible to order motors, with two shaft ends, with increased slip characteristics.
Electric motors AIM 355 can have different mounting designs – on feet with one cylindrical shaft end; on feet with two shaft ends. The motors can be installed in any spatial position. Also, AIM 355 m4 electric motors are available in versions with a flange and combined – feet and flange. Electric motors can be produced with one or two cylindrical shaft ends.
It should be noted that the AIM 355 electric motor corresponds to the insulation heat resistance class F, which means that the insulation is resistant to strong heating. This is achieved through the use of asbestos and fiberglass combined with synthetic materials.
The main parts of the engines, namely the shields and the frame, are made of cast iron.
High-quality materials and design features provide the engine with long-term operation of AIM 355 engines without interruptions.
Order form
Specify your data and our managers will contact you shortly!Delivery all over Ukraine
The quality system at the enterprise is certified in accordance with ISO 9001:2015
Call back order
Specify your phone number and our managers will contact you shortly!