Demand for electric motors AИР in Ukraine remains stably high, what makes them so popular? The answer is obvious: simplicity of design and repair, as well as low cost. Inexpensive and efficient – this is how you can characterize asynchronous motors AИР. This type of engine is used very widely in agriculture: for pumps and […]
The manufacturer LLC”DNEPRORESURS”offers you to buy ELMO electric motors of the AИР series for general industrial purposes in the basic configuration with a 2-year warranty. Technical characteristics of general industrial asynchronous motors ELMO are presented in the catalog. ELMO motors operate from a mains supply with a frequency of 50 Hz, voltages of 220, 380, […]
Demand for electric motors АИР in Ukraine remains stably high, what makes them so popular? The answer is obvious: simplicity of design and repair, as well as low cost. Inexpensive and efficient – this is how you can characterize asynchronous motors AИР. This type of engine is used very widely in agriculture: for pumps and […]
ROLLER MOTOR APMU 53-12
Asynchronous roller table motors ARMU 53-12 are designed for individual drive of roller table rollers, for completing cable drum drives of tower cranes, as well as other drives at metallurgical enterprises for operation in macroclimatic regions with moderate (U), tropical (T) and moderate -cold (UHL) climate in conditions determined by placement category 1, 2 and 3 according to GOST 15150-69..
ARMU – IM 1001; IM 1002; IM 3001;
ARMKU – with a bed without paws with a horizontal conical shaft.
The motors are designed to operate from an AC network with a frequency of 50 and 60 Hz for a rated voltage of 380 V. The motors can be manufactured for other standard voltages from 220 to 660 V. The winding connection scheme is star or delta.
The motors are suitable for operation when powered by a frequency converter.
Motors manufactured for a frequency of 50 Hz allow operation in the frequency range from 10 to 70 Hz with a proportional change in voltage, as well as with a disproportionate change in voltage depending on the change in frequency.
The main rated operating mode of the motors is long-term S1 or intermittent with frequent starts and stops with a duty cycle of 40%.
The rated operating mode of motors for cable drums is the inhibited state at 25% duty cycle with a cycle time of 10 minutes. In this case, the temperature rise of the stator winding should not exceed 200°C.
Installation and mounting dimensions and technical characteristics of the motors are indicated in the catalog.
The design of the motors is closed with natural air cooling through the ribbed surfaces of the beds and end shields.
Degree of protection IP 54.
Order formSpecify your data and our managers will contact you shortly!
Delivery all over Ukraine
The quality system at the enterprise is certified in accordance with ISO 9001:2015
Call back orderSpecify your phone number and our managers will contact you shortly!