ROLLER MOTOR APMU 53-10

Asynchronous roller table motors ARMU 53-10 are designed for individual drive of roller table rollers, for completing cable drum drives of tower cranes, as well as other drives at metallurgical enterprises for operation in macroclimatic regions with moderate (U), tropical (T) and moderate -cold (UHL) climate in conditions determined by placement category 1, 2 and 3 according to GOST 15150-69..

DESIGN BY MOUNTING METHOD FOR ROLLER TAN ELECTRIC MOTORS:

ARMU – IM 1001; IM 1002; IM 3001;
ARMKU – with a bed without paws with a horizontal conical shaft.

OVERALL AND CONNECTING DIMENSIONS (technical characteristics are indicated in the price list)

IM1001, IM1002

IM3001

VARIANTS OF ROLLER TAN ELECTRIC MOTORS

The motors are designed to operate from an AC network with a frequency of 50 and 60 Hz for a rated voltage of 380 V. The motors can be manufactured for other standard voltages from 220 to 660 V. The winding connection scheme is star or delta.

The motors are suitable for operation when powered by a frequency converter.

Motors manufactured for a frequency of 50 Hz allow operation in the frequency range from 10 to 70 Hz with a proportional change in voltage, as well as with a disproportionate change in voltage depending on the change in frequency.

The main rated operating mode of the motors is long-term S1 or intermittent with frequent starts and stops with a duty cycle of 40%.

The rated operating mode of motors for cable drums is the inhibited state at 25% duty cycle with a cycle time of 10 minutes. In this case, the temperature rise of the stator winding should not exceed 200°C.

SPECIFICATIONS OF ELMO ROLLER MOTORS

Installation and mounting dimensions and technical characteristics of the motors are indicated in the catalog.

The design of the motors is closed with natural air cooling through the ribbed surfaces of the beds and end shields.

Degree of protection IP 54.

Dimensions of APMU series electric motors

• APMU42-4
• APMU42-6
• APMU42-8
• APMU42-10
• APMU42-12
• APMU43-4
• APMU43-6
• APMU43-8
• APMU43-10
• APMU43-12
• APMU52-4
• APMU52-6
• APMU52-8
• APMU52-10
• APMU52-12
• APMU53-6
• APMU53-8
• APMU53-10
• APMU53-12