Products catalog
Articles
Electric motor AIR 355
Description
Asynchronous electric motors AIR 355 belong to the class of general industrial three-phase motors, designed for continuous operation in an alternating current network.
Technical characteristics of the AIR 355 electric motor
| Type | Power, kW | Rotation speed, rpm | Efficiency,% | cos φ | Rated current at 380V, A |
Istart /In | Mstart /Mn | Mmax /Mn | Moment of inertia, kg * m2 | Mass, kg |
| AIR 355MA6 | 160 | 990 | 94.5 | 0.88 | 292 | 6.7 | 1.9 | 2 | 9.5 | 1550 |
| AIR 355MB6 | 200 | 990 | 94.5 | 0.88 | 365 | 6.7 | 1.9 | 2 | 10.4 | 1600 |
| AIR 355 M4 | 250 | 1490 | 95.2 | 0.9 | 443 | 6.9 | 2.1 | 2.2 | 6.5 | 1700 |
| AIR 355L6 | 250 | 990 | 94.5 | 0, 88 | 457 | 6.7 | 1.9 | 2 | 12.4 | 1700 |
| AIR 355M2 | 250 | 2980 | 95.2 | 0.92 | 433 | 7.1 | 1.6 | 2.2 | 3 | 1900 |
| AIR 355L4 | 315 | 1490 | 95.2 | 0.9 | 559 | 6.9 | 2.1 | 2.2 | 8.2 | 1900 |
| AIR 355MA8 | 132 | 740 | 93.7 | 0.82 | 261 | 6.4 | 1.8 | 2 | 7,9 | 2000 |
| AIR 355MB8 | 160 | 740 | 94,2 | 0.82 | 315 | 6.4 | 1.8 | 2 | 10.3 | 2150 |
| AIR 355L8 | 200 | 740 | 94.5 | 0.83 | 387 | 6.4 | 1.8 | 2 | 12.3 | 2250 |
| AIR 355L2 | 315 | 2980 | 95.4 | 0.92 | 545 | 7.1 | 1,6 | 2,2 | 3,5 | 2300 |
More about AIR 355 electric motors
The AIR 355 s4 electric motor, by default, is manufactured for operation in a network with alternating current 220, 380 V, with six terminals in the terminal box.
Also, the AIR 355 electric motor can have a climatic modification, the third category of placement, which allows the engine to be used indoors, without adjusting climatic conditions.
It is important to note that AIR 355 electric motors are marked according to the degree of protection IP54. This means that the AIR 355 electric motor is protected from dust and splashes of water, however, its casing is not sealed, so it will not withstand prolonged immersion in water.
It is also possible to order motors, with two shaft ends, with increased slip characteristics.
Main characteristics and parameters of the AIR 355 electric motor
Electric motors AIR 355 can have different mounting designs – on feet with one cylindrical shaft end; on feet with two shaft ends. The motors can be installed in any spatial position. Also, AIR 355 m4 electric motors are available in versions with a flange and combined – feet and flange. Electric motors can be produced with one or two cylindrical shaft ends.
It should be noted that the AIR 355 electric motor corresponds to the insulation heat resistance class F, which means that the insulation is resistant to strong heating. This is achieved through the use of asbestos and fiberglass combined with synthetic materials.
The main parts of the engines, namely the shields and the frame, are made of cast iron.
High-quality materials and design features provide the engine with long-term operation of AIR 355 engines without interruptions.
Dimensions of AIR electric motors
Order form
Specify your data and our managers will contact you shortly!
Delivery all over Ukraine
- Delivery of our products is carried out by delivery services in accordance with the deadlines.
- Electric motors in stock. Sending in the shortest time.
The quality system at the enterprise is certified in accordance with ISO 9001:2015
Call back order
Specify your phone number and our managers will contact you shortly!