Products catalog
Articles
Electric motor AIR 315 M4, M6
Electric motors AIR 315 M4, M6 belong to the class of general industrial three-phase motors, designed for continuous operation in the alternating current network.
Type | Power, kW | Speed of rotation, rpm | Efficiency,% | cos φ | Rated current at 380V, A |
Istart/In | Mstart/Mn | Mmax/Mn | Moment of inertia, kg * m2 | Mass, kg |
AIR 315S6 | 110 | 985 | 94 | 0.86 | 207 | 6.7 | 2 | 2 | 3,6 | 880 |
AIR 315S8 | 90 | 740 | 93.8 | 0.82 | 178 | 6.4 | 1,8 | 2 | 3,6 | 880 |
AIR 315S4 | 160 | 1480 | 94.9 | 0.89 | 288 | 6,9 | 2,1 | 2,2 | 2,7 | 1000 |
AIR 315M6 | 132 | 985 | 94.2 | 0.87 | 245 | 6,7 | 2 | 2 | 6 | 1050 |
AIR 315M8 | 110 | 740 | 94 | 0.82 | 217 | 6,4 | 1,8 | 2 | 6 | 1050 |
AIR 315S2 | 160 | 2975 | 94.6 | 0.92 | 279 | 7.1 | 1.8 | 2.2 | 2.82 | 1170 |
AIR 315M4 | 200 | 1480 | 94.9 | 0, 89 | 360 | 6.9 | 2.1 | 2.2 | 4.82 | 1200 |
AIR 315M2 | 200 | 2975 | 94.8 | 0.92 | 348 | 7.1 | 1.8 | 2.2 | 3.66 | 1460 |
The AIR 315 electric motor, by default, is manufactured for operation in a network with alternating current 220, 380 V, with six terminals in the terminal box.
Also, the AIR 315 electric motor can have a climatic design, the third category of placement, which allows the engine to be used indoors, without adjusting climatic conditions.
It is important to note that AIR 315 electric motors are marked according to the degree of protection IP54. This means that the AIR 315 electric motor is protected from dust and splashes of water, however, its casing is not sealed, so it will not withstand prolonged immersion in water.
It is also possible to order motors, with two shaft ends, with increased slip characteristics.
Electric motors AIR 315 M6, M4 can have different mounting designs – on feet with one cylindrical shaft end; on feet with two shaft ends. The motors can be installed in any spatial position. Also, AIR 315 electric motors are available in versions with a flange and combined – feet and flange. Electric motors can be produced with one or two cylindrical shaft ends.
It should be noted that the AIR 315 M6, M4 electric motor corresponds to the insulation heat resistance class F, which means that the insulation is resistant to strong heating. This is achieved through the use of asbestos and fiberglass combined with synthetic materials.
The main parts of the engines, namely the shields and the frame, are made of cast iron.
High-quality materials and design features ensure the engine has a long-term operation without interruption.
Order form
Specify your data and our managers will contact you shortly!Delivery all over Ukraine
The quality system at the enterprise is certified in accordance with ISO 9001:2015
Call back order
Specify your phone number and our managers will contact you shortly!