General industrial purpose asynchronous motors with square-cage rotor of 2AIR series are designed for operation from a three-phase alternating current network, with frequency 50 Hz and 60 Hz, with voltage from 220 to 660 V.
The line of this series of general industrial purpose motors consists of 56, 63, 71, 80, 90, 100, 112, 132, 160, 180, 200, 225, 250, 280, 315, 355, 400 and 450 standard sizes, with the quality of poles 2, 4, 6, 8 and 10.
The electrical motors are manufactures with such classes of energy efficiency:
In IEC 60034-30-1 there are such classes of energy efficiency for asynchronous motors (IE = International Efficiency):
IE1 (Standard Efficiency)
IE2 (High Efficiency)
IE3 (Premium Efficiency)
IE4 (Super Premium Efficiency)
Linkage dimensions and technical features of the motors are indicated in the catalogue.
2AIR motors are produced with the connection of powers to standard sizes according to DIN 42673 and DIN 42677 (CENELEC).
The motors are designed for operation at S1 mode.
The engines are manufactured in cast-iron case, have the level of protection IP55.
The engines are equipped with RTC thermistors (with positive coefficient of resistance) for protection the stator from overheating or РТ-100 sensors could be installed for protection of the stator and bearing units from overheating (this option is ordered by a customer).
The motors have an insulation system of class of heat resistance F (thermal index is 155C). With a customer’s agreement the motors could be produced with class of heat resistance H.
According to the method of mounting there are such motors:
- on feet - IM1081 (B3)
- on feet with a flange – IM2081 (B35)
- without feet with a flange – IM3081 (B5)
More detailed information about a method of mounting is indicated in the catalogue.
The engines allow both right and left rotation directions. The direction of rotation must be changed only from the rest position of the rotor.
With the manufacturer’s agreement, motors with power from frequency-controlled converters can be manufactured (for this purpose it’s needed to fill the data sheet).
EXAMPLE OF ENGINES MARKING:
For the motors of 2AIR series
2AIR 160 M 2 U 2
- Series marking with the connection of powers to installation sizes;
- Height of rotation axis, mm;
- The installation dimension along the length of the frame;
- The quality of poles;
- Climatic category;
- Location category.