Articles

17 июня 2017 Asynchronous electric motors and how to choose the right electric motor at a good price in Ukraine.
Demand for electric motors AIR in Ukraine remains stably high, what makes them so popular? The answer is obvious: simplicity of design and repair, as well as low cost. Inexpensive and efficient - this is how you can characterize asynchronous motors AIR, AIRМ. This type of engine is used very widely in agriculture: for pumps and machine tools, compressors, fans, mills, transport mechanisms, feed chopper, etc.
More
26 may 2016 WHERE TO BUY THE GENERAL INDUSTRIAL ASYNCHRONOUS ENGINES
Demand for electric motors AIR in Ukraine remains stably high, what makes them so popular? The answer is obvious: simplicity of design and repair, as well as low cost. Inexpensive and efficient - this is how you can characterize asynchronous motors AIR, AIRМ. This type of engine is used very widely in agriculture: for pumps and machine tools, compressors, fans, mills, transport mechanisms, feed mills, etc. The voltage applied to the stator winding creates an alternating rotating magnetic flux. It creates an EDS in the rotor, which causes the appearance of a current. There is a starting torque turning the…
More
8 may 2016 WHERE TO BUY THE GENERAL INDUSTRIAL ASYNCHRONOUS ENGINES (AIR, AIRМ)?
Demand for electric motors AIR in Ukraine remains stably high, what makes them so popular? The answer is obvious: simplicity of design and repair, as well as low cost. Inexpensive and efficient - this is how you can characterize asynchronous motors AIR, AIRM. This type of engine is used very widely in agriculture: for pumps and machine tools, compressors, fans, mills, transport mechanisms, feed mills, etc. The voltage applied to the stator winding creates an alternating rotating magnetic flux. It creates an EDS in the rotor, which causes the appearance of a current. There is a starting torque turning the…
More

GENERAL INDUSTRIAL ELECTRIC MOTORS OF SERIES AIR

Description

General industrial asynchronous squirrel-cage electric motor of AIR series are desined to work three-phase circuits with alternating current of 50 Hz and 60 Hz frequency.

The line of General industrial motors series consists of 56,63,71,80, 90, 100, 112, 132, 160, 180, 200,225, 250, 280, 315 , 355,400 and 450 standart size, with the quality of  pole terminal 2,4,6, 8 and 10.

A linkage dimention and engine specification is listed in the catalogue.

The nominal value of c+limatic factors for motors operating them in working condition according to GOST  is 15150 for Climatic design of product U, UHL and T.

When ambient and operational temperatures are more than 40°C above 0 nominal power must be reduced to 5 % for each 5 °C air raisings.

Maximum ambiant temperature during the operation must not be more than 60 °С.

Nominal power is got in long operating regime when the temperature is 40° and sea level elevation is not more than 1000 m, but safe operation is ensured on even more than 1000 m height  to 4300 m above sea level while engine power is reducing.

In the operation on more than 1000 m height to 4300 m engine load must be reduced according to map 1.

Map 1

Sea level elevation, м

 

1000

1500

2000

2500

3000

3500

4000

4300

Power factor correction, kN

 

1

0,96

0,92

0,88

0,84

0,79

0,75

0,72

 

Air motors are manufactured  with powers tied to dimension type according to GOST 183. The motors are designed for operation in S1 mode.The engines are manufactured in a cast-iron casing, have the level of protection IP55 according to GOST 17494 (fan cowling – IP20) .

The motors are supplied with RTS termistor (termistores with positive temperature coefficient of resistance) for the stator protection from termal overload; or PT-100 sensor could be istalled for the protection of stator and bearing system from thermal overload (this option is proposed according to a customer ‘s agreement).

The motors have insulating system of heat-resistance slass F temperatura index is 155°С). The rise of primary winding temperature  over the ambient temperatureof motors which have service factor 1.15 is not more than 83 °С, motors which have service factor 1.1 is not more than 90 °С. In agreement with the customer  the motors can be manufactured with temperature class H.  The engines are manufactured in the following versions according to the method of GOST mounting 2479:- foot mounting IM1081(В3);-  flanged foot mounting  - IM2081 (В35)- flanged no foot mounting - IM3081(В5)A more detailed description of the mounting method is given in the catalogue. Motors allow both right and left rotation directions. The direction of rotation must be changed only from the rest position of the rotor. The motors correspond to the operating conditions group M6 - vibration loads corresponding to the degree of rigidity 10a (frequency range 1-100 Hz maximum acceleration 1 g in accordance with GOST 17516.1-90).

The motors with power from variable freguency converter are produced with manufacturer’s agreement ( for this you should fill the order from). The mean-square value of dearing seat vibration speed is not more than 2,8 mm/s.

Example of motor marking:

For AIR motors

AIR    160     М      2       U       2       

  1. Series marking is done with the connection of  power and installation dimensions (ac. to GOST 183);
  2. Axis of rotation height, mm;
  3. Installation dimension according to the length of the frame;
  4. Quality of poles;
  5. Climatic modification;
  6. Placement category. 

 

 

All electric motors of our company have passed the necessary tests and meet all standards and requirements of technical safety ...
We produce and sell products at below-market prices, with warranty service, which will be the most profitable for you and your company ...
We carry out technical consultations, maintenance, warranty and post-warranty repair of electric motors ...

Delivery all over Ukraine

  • Delivery of our products is carried out by delivery services in accordance with the deadlines.
  • Electric motors in stock. Sending in the shortest time.

The quality system at the enterprise is certified in accordance with ISO 9001: 2008

Вход на сайт
После отправления, в течении 5 минут к Вам на почту придут инструкции по восстановлению пароля.
Новый пользователь

Вход через

Заказ звонка
Быстрый заказ